TÉLÉCHARGER VIEWER AUTOVIEW GRATUIT

Fonctionnement de la voie locale 29 Accès à la boîte de dialogue Écon. To soft switch to a target device: This setting alters how target devices will display in several dialog boxes, including Main, Devices and Broadcast. Pour obtenir des instructions sur l utilisation du visualiseur vidéo, reportez-vous au Chapitre 5. Connexion à l interface Web du commutateur AutoView: Closes the current dialog box without saving changes and returns to the previous one.

Nom: viewer autoview
Format: Fichier D’archive
Système d’exploitation: Windows, Mac, Android, iOS
Licence: Usage Personnel Seulement
Taille: 18.24 MBytes

Un voyant orange s allume lorsque cette voie est sélectionnée. Automatic video adjustment NOTE: Voir les mentions légales. Access the Commands dialog box. Technical Specifications Table D.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.

viewer autoview

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. All other marks are the property of their respective owners Avocent Corporation. All rights reserved A.

Dangerous Voltage This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Protective Grounding Terminal This symbol indicates a terminal which must be connected to earth ground prior to making any other connections to the equipment. Flash Upgrades Appendix B: Technical Specifications Appendix E: Main Dialog Box Functions Table 3.

Viewing Appliance Information Table 5. Video Viewer Window Description Table 5. Sun Key Emulation Table E. Basic AutoView Switch Configuration Position Flag Figure 3. Avocent AutoView Explorer Window Side Navigation Bar Figure 5. Manual Video Adjust Dialog Box Console Main Menu Figure 6. They provide customers with a significant reduction of cable volume, secure remote access and flexible server management from anywhere at anytime. It provides VT terminal emulation, break suppression and port history in a compact, convenient module.

Featuring secure point-and-click web browser-based access to control any attached device, the AutoView switch web interface provides a Video Viewer window that allows you to control the keyboard, monitor and mouse functions of the connected target device in real time. See Chapter 4 for more details.

Comparer les visionneuse DWG | DWG TrueView, A et AutoCAD Mobile | Autodesk

If the building has 3-phase AC power, ensure that the computer and monitor are on the same phase. For best results, they should be on the same circuit. To avoid potentially fatal shock autovifw and possible damage to equipment, please observe the autlview precautions: Do not use a 2-wire power cord in fiewer Avocent product configuration. Test AC outlets at the target device and monitor for proper polarity and grounding.

  TÉLÉCHARGER MAYADA BSILIS GRATUIT GRATUIT

Use only with grounded outlets at both the target device and monitor. The AC inlet is the main power disconnect. If installed in a closed rack assembly, the operating temperature of the rack environment may be greater than room ambient. Use care not to exceed the rated maximum ambient temperature of the switch.

Installation of the equipment in a rack should be such that the amount of airflow required for safe operation of the equipment is not compromised.

viewer autoview

Mounting of the viewet in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading. Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of circuits might have on overcurrent protection and supply wiring.

Consider equipment nameplate ratings for maximum current. Reliable earthing of rack mounted equipment should be maintained.

AutoView / Installer/User Guide – PDF

Pay particular attention to supply connections other than direct connections to the autovie circuit for example, use of power strips. Reliable earthing of equipment should be maintained.

Turn on the power and verify viewdr all connections are working. Make the appropriate mouse setting adjustments. Basic AutoView Switch Configuration. Locate the power cord that came with the switch and plug one end into the power socket on the rear of the switch. Plug the other end into an appropriate AC wall outlet. To reduce the risk of electric shock or damage to your equipment: The grounding plug is an important safety feature.

You must install both a keyboard and mouse on the local ports or the keyboard will not initialize properly. Attach the color-coded connectors of an AVRIQ module to the corresponding keyboard, monitor and mouse ports on the server you will be connecting to the switch. After approximately one minute, the switch completes initialization and displays the OSCAR graphical user interface Free tag on the local port monitor.

Connect the other end of the CAT 5 patch cable to the desired port on the back of your switch.

Power up your serial device. Setting up your network for the on-board web interface AutoView switching systems that have the on-board web interface use IP addresses to uniquely identify the switch and the target devices.

Avocent recommends that IP addresses be reserved for each switch and that they remain static while the AutoView switches are connected to the network. The green LED, labeled Link, illuminates when a valid connection to the network is established at a rate of Mbps and blinks when there is activity on the port. The amber LED illuminates when you are communicating at a rate of Mbps when using an Ethernet connection. If neither LED is illuminated, connection speed is at a rate of 10 Mbps.

A green LED illuminates when the attached target device has power.

AutoView 3100/3200. Installer/User Guide

An amber LED illuminates when that port is selected. The LEDs blink during a firmware upgrade. Before using the web interface to access the switch, first specify an IP address through the SETUP port on the back panel of the switch. To ensure that the local mouse movement and remote cursor display remain in sync, mouse acceleration needs to be set to none for all user accounts accessing a remote system using a KVM switch.

  TÉLÉCHARGER RECHANY CAMELEON GRATUIT

Mouse acceleration should also be set to none on every remote system. Special cursors should not be used and cursor visibility options, such as pointer trails, Ctrl key cursor location animations, cursor shadowing and cursor hiding should also be turned off.

This port enables you to connect a keyboard, monitor and mouse to the switch for direct access. Targets can be identified by customizable names. The Port column indicates the port to which a target device is connected.

The Main dialog box will appear. Disconnect the KVM session. Access the Commands dialog box.

viewer autoview

To manage a KVM session from the Main dialog box: The following table describes the status symbols. Connected target device is powered down or is not operating properly and the AVRIQ module is offline. Connected switch is online. Connected switch is offline or not operating properly.

Doing so may render the module permanently inoperable and require the AVRIQ module to be returned to the factory for repair. For instance, in Figure 3. Selecting target devices Use the Main dialog box to select target devices.

To select target devices: Double-click the target device vviewer, EID or port number. If the display order of your list is by port Port button is depressedaufoview the port number and press Enter. Press Zutoview Screen and then Backspace. This key combination toggles you between the previous and current connections. To disconnect from a target device: Xutoview leaves the user in a free state, with no target autovied selected. The status flag on your desktop displays Free. Soft switching Soft switching is the ability to switch target devices using a hotkey sequence.

You can soft switch to a target device by pressing Print Screen and then typing the first few characters of its name or number. The Main dialog box appears. Click Setup – Menu. The Menu dialog box appears. For Screen Delay Time, type the number of seconds of delay desired before the Main dialog box is displayed after Print Screen is pressed. To soft switch to a target device: If the display order of the Main dialog is by port Port button is depressedtype the port autofiew and press Enter.

To switch back to the previous target device, press Print Screen then Backspace. Opens the Help screen for the current dialog box. Closes the current dialog box without saving changes and returns to the previous one.

If the Main dialog box is displayed, pressing Escape closes the OSCAR interface and displays a status flag if status flags are enabled. See Controlling the status flag in this chapter for more viewr.

Author: admin